How To Make a Cheap Stick Vacuum at Home

Making a homemade stick vacuum involves repurposing components and creating a simple, functional device. Here’s a basic guide on how to make a cheap stick vacuum using materials you might have around the house or can easily obtain:

Materials Needed:

1. Motor: You can use a small motor from an old vacuum cleaner, blender, or any appliance with sufficient suction power.
2. Power Source: Depending on the motor, you can use a rechargeable battery pack or plug it into a wall socket.
3. Container: A small plastic or metal container to act as the dustbin.
4. Tube or Pipe: A lightweight pipe or tube (such as PVC) for the vacuum shaft.
5. Brush or Nozzle: You can fashion a simple nozzle from a plastic bottle or use an existing attachment from an old vacuum cleaner.
6. Filter: A piece of cloth or a small filter from an old appliance to capture dust.
7. Wiring and Switch: To connect the motor to the power source and to turn the vacuum on/off.
8. Miscellaneous: Screws, glue, tape, and other tools for assembly.

Steps:

1. Motor and Power Setup:

• Secure the motor inside the container, ensuring it is stable and can be connected to the power source.
• Attach the power source, making sure to use proper insulation and connectors to prevent short circuits.

1. Dustbin and Filter:

• The container will act as the dustbin. Cut a hole in the top to fit the tube or pipe.
• Attach the filter material inside the container near the motor’s intake to prevent dust from entering the motor.

1. Tube and Nozzle:

• Attach the tube or pipe to the hole in the container. This will serve as the main shaft of the vacuum.
• Secure the brush or nozzle at the end of the tube. You can use tape or glue to attach it firmly.

1. Wiring and Switch:

• Connect the motor to the switch and then to the power source. Make sure all connections are secure and insulated.
• Position the switch on the handle or shaft of the vacuum for easy access.

1. Final Assembly and Testing:

• Ensure all parts are securely fastened and that the vacuum is safe to use.
• Test all appliances including the vacuum by turning it on and checking the suction power. Make adjustments as needed.

Safety and Tips:

• Safety First: Always ensure that electrical components are properly insulated and that the vacuum is safe to use, especially if using household electrical power.
• Optimize Suction: If the suction power is too weak, check for air leaks and ensure the motor is powerful enough for the setup.
• Maintenance: Regularly clean the filter and container to maintain efficiency.

This DIY stick vacuum can be a fun project and a way to repurpose old appliances, but it may not match the performance of commercial vacuums. Always prioritize safety and consider consulting with an expert if you’re unsure about handling electrical components.

Contact us

Let’s Get Started Today!